ADC sistemi
WindowsUpdated October 30, 2026

ADC
Smart Window

Smart window control with weather protection, developed and made in Slovenia. Here's everything you need to wire, set up and use the ADC Smart Window T010 controller day to day.

  • T010model
  • 230 V~power supply
  • ADC Homeapp
  • Wi-Fi + BTconnectivity

Fine-tune how it works: favourite positions, direction, switch type and calibration.

The gold markers on the screenshots show where to tap. Click a screenshot to enlarge it and see what every button does.
The screenshots show the app in Slovenian. Buttons are in the same place in your language.

Window settings

Settings overview

Open the settings with the gear in the top right of the window detail screen. They are divided into three groups, the same as below: Favourites, Window and Controller. After each change the app confirms that the device has been updated successfully; tap OK. Tap a setting below for a description.

  1. 1Tap the gear for settings
  2. 2Close the message

Settings

Favourites

Two saved positions you can move the window to with one tap, using the Favourite and Ventilation buttons on the window detail screen (see the Use tab). They are stored on the phone, so each phone has its own positions, and you set them again when you change phones.

Favourite

Move the window to the desired position with your finger or use Open or Close. Tap Save and confirm with OK. The position is saved on the phone.

  1. 1Save the position
  2. 2Fully closed
  3. 3Fully open
  4. 4Set the position with your finger
  5. 5Confirm
Ventilation

Works the same as Favourite: set a position for airing, for example a partly open window, tap Save and confirm with OK. This position is also saved on the phone.

  1. 1Save the position
  2. 2Fully closed
  3. 3Fully open
  4. 4Set the position with your finger
  5. 5Confirm

Settings

Window

Settings for the window and the actuator. They apply to the device, so all users see the change.

Rename

Enter a new name and tap Confirm. The Confirm button becomes active once you change the name. Keep the name short: room first, then position, for example “Bathroom roof window”.

  1. 1Enter a new name
  2. 2Confirm the name
Recalibrate

Runs the calibration again, for example after replacing the actuator or changing the stroke. Confirm with Yes. During calibration the window moves by itself, so there must be no people, animals or objects in the window opening or in the path of the sash.

  1. 1Confirm calibration
  2. 2Confirm
Reverse direction

Select what is reversed. If the window moves the wrong way from both the app and the wall switch, select Motor. If the app works correctly but the switch works the opposite way, select Switch. If it moves the wrong way from the app but correctly from the switch, select Both. No rewiring is needed.

  1. 1Motor direction reversed
  2. 2Switch direction reversed
  3. 3Both directions reversed
  4. 4Confirm
Switch type

Select what is connected on the wall: a switch stays in the pressed position, a push-button springs back after pressing. With a push-button, if you press the same direction twice in a row, the window keeps moving in that direction until you stop it or it reaches the end position.

  1. 1A switch is connected
  2. 2A push-button is connected
  3. 3Confirm
History

Shows who moved the window and when, and to which position.

Settings

Controller

Restarting and removing the device.

Deleting a device cannot be undone. The device is also removed for all other users who have access to it, and its history is deleted. To add it again, you must be on site, close to the controller.
Restart device

Restarts the controller, for example if the device does not respond. The settings remain saved. You can restart it yourself. Confirm with Yes.

  1. Confirm the restart
Delete device

Removes the device from the app. Confirm with Yes. Also delete the device if the controller has been reset to factory settings, then add it again.

  1. Confirm deletion

Next

What's next?

ADC Smart Window
ADC Smart WindowFresh air, whenever you need it.A smart window controller, designed and made in Slovenia.

Need help?

You're backed by our team in Kranj, who developed the system and make it. In your message, include the controller model and briefly describe the problem. You'll get a reply within 3 working days at most.

First check the tab Troubleshooting.

Write to us Book installationinfo@adcsmartsystems.com