ADC sistemi
RemotesUpdated November 2, 2026

ADC
Smart Shade Remote

Ten-channel remote for ADC shades. It controls the shades directly over Bluetooth, so it works without internet too.

  • 10channels
  • 5shades per channel
  • 2Γ— AAAbatteries
  • Bluetoothno internet needed
The gold markers on the screenshots show where to tap. Click a screenshot to enlarge it and see what every button does.

Before you start

What you need

The remote does not need to be connected to mains power, so you do not need an electrician.
  • The ADC Smart Shade Remote and 2 AAA batteries.
  • At least one ADC Smart Shade or ADC Smart Shade PRO controller already added to the ADC Home app.
  • A phone with the ADC Home app.

Batteries

Insert the batteries

  1. Open the cover

    Turn the remote over. The battery cover is the lower part of the back: grip it by the ribbed area and slide it down with your fingers to open it.

    1. Battery cover: slide it down with your fingers
  2. Insert two AAA batteries

    Insert 2 AAA batteries. Make sure the polarity (+ and βˆ’) matches the marking in the compartment.

    1. 1Compartment for 2 AAA batteries
    2. 2Match the batteries to the + and βˆ’ markings
  3. Close the cover

    Slide the cover back until it clicks. The remote switches on and the display shows β€œC” (config): the remote has no channels set up yet and is ready to be set up in the app.

Next

What’s next?

Need help?

You're backed by our team in Kranj, who developed the system and make it. In your message, include the controller model and briefly describe the problem. You'll get a reply within 3 working days at most.

First check the tab Troubleshooting.

Write to us Book installationinfo@adcsmartsystems.com