Buttons
Using the remote
The buttons always control all shades in the selected channel at once. The remote switches itself off 30 seconds after the last button press and switches on again when you press a button.
- 1Up: the shades in the selected channel go up
- 2Stop: the shades stop
- 3Down: the shades in the selected channel go down
- 4Left and right: choose the channel
Venetian blinds
Slat tilt
With venetian blinds, you can also set the slat tilt with the remote.
Switch on tilt
Press and hold the stop button until a dot appears next to the channel number (for example “4.”). The dot means the remote is in tilt mode.
- 1Hold stop: tilt mode on or off
- 2Up and down: adjust the slat tilt
- 3Left or right: leave tilt mode and change channel
Set the tilt
The up and down buttons change the slat tilt of all venetian blinds in the selected channel.
Turn off tilt
Hold the stop button again for 2 seconds, or press the left or right button. The dot next to the number disappears. The left or right button also changes the channel.
No internet needed
Works even when the internet does not
The remote controls the controllers directly over Bluetooth. It does not need your home Wi-Fi or the internet, so you can control your shades with the remote even during an internet outage. You only need the app to add the remote and assign shades to channels.
Next
What’s next?
Need help?
You're backed by our team in Kranj, who developed the system and make it. In your message, include the controller model and briefly describe the problem. You'll get a reply within 3 working days at most.
First check the tab Troubleshooting.
Write to us Book installationinfo@adcsmartsystems.com